Wireless – RoboIndia

DIY Wireless Remote Controlled Robot STEM Education Learning Kit

admin — Wed, 27 Mar 2024 08:56:08 +0000

DIY wireless remote-controlled robotic kit, for STEM education, this kit builds creativity and teach your children about wireless technology.

Roinco 433MHZ Lora RA02 Long Range RF Wireless Module with 2.4 Ghz Antenna

admin — Wed, 27 Mar 2024 08:56:02 +0000

Ra-02 is based on sx1278 wireless transparent transmission module (transceiver one), socket it can connect external antenna. Using advanced lora spread spectrum technology, communication distance is10000 meters, super error correction, anti-interference ability, with the air wake-up function (ultra-low power consumption). It can be used in the enviroment with thousands of people, especially for meter reading, smart home, burglar alarm and other equipment. Lora spread spectrum modulation technology +20dbm-100mw constant rf power output when voltage changes high sensitivity: Low to -148dbm half-duplex spi communication programmable bit rates up to 300kbps supports fsk, gfsk, msk, gmsk, lora and ook modulation modes 127db rssi dynamic range automatic rf signal detection, cad mode and ultra-high-speed afc with crc, up to 256 bytes of packet engine small volume dual-row stamp-hole patch package with shielding shell spring antenna (ra-01) external antenna (ra-02).Product Description

433MHZ LORA SX1278 LONG RANGE RF WIRELESS MODULE

admin — Wed, 27 Mar 2024 08:55:58 +0000

This module is a type of low cost RF front-end transceiver module based on SX1278 from Semtech Corporation. It keeps the advantages of RFIC SX1278 but simplifies the circuit design. The high sensitivity (-136dBm) in LoRa modulation and 20dBm high power output make the module suitable for low range and low data rate applications. The module consists of RFIC SX1278, thin SMD crystal and antenna matching circuit. The antenna port is well matched to standard 50 Ohm impedance. Users don’t need to spend time in RF circuit design and choose suitable antennas for different applications. The module operates at 1.8~3.6V with extra low standby current which makes it suitable for battery powered-up applications. Because it is purely hardware module and it adopts Â±10ppm crystal which the resolution of it places a important role in calculating spreading factor, bandwidth, etc

2.4GHz NRF24L01 Wireless Transceiver Communication Module with antenna

admin — Wed, 27 Mar 2024 08:55:52 +0000

The nRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature – very nice! This board features a reverse polarized SMA connector for maximum RF range. And there are PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts. This module comes with the 2.4G antenna (2DB), with 250Kbps transmission rate on open air it can reach the 800-1K meters communication distance.

Items Included :

1. NRF24L01 Wireless Transceiver Module – 1 Nos.

Robo India nRF24L01+ Wireless Module Single Chip 2.4GHz Transceiver

admin — Wed, 27 Mar 2024 08:55:38 +0000

Product Description:
Tutorial Available at Robo India Tutorial Portal.
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
Particularly suitable for industrial control applications.
125 Channels, Multi-point communication and frequency hopping to meet the communication needs
Built-in hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
Built-in voltage regulator
Standard DIP Pitch Interface for embedded applications

Robo India Arduino Based Wireless DTMF Robot Kit with Compatible Arduino UNO

admin — Wed, 27 Mar 2024 08:55:34 +0000

Arduino Based Wireless DTMF Robot Kit with Compatible Arduino UNO Board on Robo India Phantom Chassis

Robo India presents Wireless DTMF robot DIY kit based on Robo India’s Phantom Chassis and Arduino Platform. A Complete Do It Yourself (DIY) kit for a wireless DTMF robot. The kit is supported by detailed tutorials for assembly, programming and explaination of the kit.

Please note that we don’t provide any text book/manual/CD/DVD with this kit. Though this kit is supported with online tutorials.

Kit Includes –

Compatible Arduino UNO Board – 1 No.

Robo India’s Motor Shield – 1 No.

Robo India’s Phantom Chassis – 1 No.

Robo India’s DTMF Board – 1 No.

3 LED Strip – 1 No.

BO Motor – 2 Nos.

Tyres – 2 Nos.

6XAA Battery Holder – 1 Nos.

USB Cable – 1 No.

3.5mm Aux. Cable – 1 No.

Male to Female Jumper Wire – 10 Nos.

Nut Bolt Spacers – 1 Set

Resources

Assembly Guide: http://goo.gl/IXcV5t

Tutorials -DTMF Robot on Phantom Chasis: http://goo.gl/9wUfyt

Robo India Arduino DTMF Controlled Wireless Robot on The Arduino Robotic Kit

admin — Wed, 27 Mar 2024 08:55:34 +0000

Arduino DTMF Controlled Robot on The Arduino Robotic Kit
This kit is a DIY kit for making a DTMF Controlled robot on Arduino. This kit comprises all elements that are needed to construct a DTMF Controlled robot on Arduino. This kit comes with detailed online tutorial support for making DTMF Controlled robot. Link provided below in the description will guide you to make a DTMF Controlled robot out of this kit.

Tutorials comprises video tutorials, guides and codes for making a DTMF Controlled robot out of this kit. Please note that this is a Do It Yourself (DIY) kit for making a DTMF Controlled robot, thus you need to have a little bit knowledge of Arduino and Arduino Platform. All of the tutorials for this kit are online only, No tutorial or guide is provided in form of CD/DVD or print with this kit.

Kit Contains

Arduino UNO (DIP Atmega 328) Compatible Board – 1 No.
Arduino Motor Shield – 1 No.
DTMF module – 1 No.
BO Motor L Type – 2 Nos.
65X30 Rubber Wheel – 2 No.
Metallic Castor Wheel – 1 No.
ARK-01 Wooden Chassis – 1 No.
6XAA Battery Holder- 1 Nos.
F2F Jumper Wires – 10 No.
USB A to B Cable – 1 No.
3.5mm Aux. Cable – 1 No.
Castor Screw Nut set – 3 Nos.
Motor Screw Nut set – 4 Nos.
Battery Holder Nut Screw Set – 2 Nos.
Arduino Screw Stud Set – 4 Nos.
DTMF Screw Stud Set – 4 Nos.

Tutorials available: https://roboindia.com/tutorials/dtmf-robot-the-arduino-robotic-kit

Joystick and Wireless RF Motor Driver for Robot Control

admin — Wed, 27 Mar 2024 08:54:59 +0000

Joy Stick for wireless RF 434 MHz based Robot Control

Plug & Play.
Based on 12E and 12D.
Tutorials available.
8 Channels for secure communications.
Radio Frequency 434 MHz based communication.
On board L293D Motor Driver.
Perfect for wireless robot control.
Acrylic made Joystick cover for perfect handling.
Battery connectors are included, Space provided for mounting battery with the help of cable ties.

Package Includes:

RF Motor Control Remote – 1 No.
RF Motor Controller Receiver – 1 No.
Transparent Acrylic top cover for Remote – 1 No.
Black Acrylic bottom cover for Remote – 1 No.
Metal Studs – 4 Nos.
M3 Screws – 8 No.
Power supply connectors – 2 Nos.

Resources:

Tutorial Link:

Wireless land rover kit

admin — Wed, 27 Mar 2024 08:54:47 +0000

Wireless Land Rover Kit

Robo India offers the wireless land rover kit. It is aimed to educate the Radio frequency communication and control.

It includes

One track belt and pulley based land rover.
Wireless RF control system.
9 Volt battery
6 AA battery holding system

Features of the kit

Easy to construct, the guide explains assembly.
Durable and repairable.
Support long range operations
Ideal for surveillance purpose.

RF MOTOR DRIVER-Wireless

admin — Wed, 27 Mar 2024 08:54:34 +0000

Description :

Wireless Motor Driver based on RF 434 MHz module.

Features:

Includes HT12E,HT12D AND L293D.
Four bit data based.
Seperate LED for data receiver indicator.
7805 for regulated 5v power supply.
On/Off switch.

Application:

Wireless Robot Control.
Spy Robot.
Wireless Relay and appliance control.

Package Contents:

RF Motor Driver Transmitter
RF Motor Driver Receiver
Datasheet