Servo motor – RoboIndia

High Torque S3003 Standard NIB Servo for R/C Car NIB Plane Boat Helicopter

admin — Wed, 27 Mar 2024 08:55:29 +0000

Feature: S3003 Standard Servo For RC Futaba Car Boat NIB Plane

Bearing Type: Bushing

Torque: 44 oz-in (3.2 kg-cm) at 4.8V; 57 oz-in (4.1 kg-cm) at 6.0V 19 sec/60 @ 6.0V

Speed: 23 sec/60 @ 4.8V

Specifications:

Size: 5.4 x 4.3 x 2cm

Connector Wire Length: 150mm

TowerPro MG996R High Torque Metal Gear Servo motor for Robotics, Arduino(15KG cm)

admin — Wed, 27 Mar 2024 08:55:29 +0000

This is the upgraded model of the MG995 servo. MG996r is a high quality, high torque for all your robotics and RC needs. This servo is specially made for use in RC airplanes, fixed-wing airplanes, helicopters, robotics, mini robot, mini manipulator, etc. Libraries available make is easy to use this servo motor in you project. This motor generates a massive 15kg.cm torque. We have carefully selected this servo motor for the best quality and performance among the numerous similar motors available in the market.

It comes with a 3-pin power ,control cable and mounting hardware.

Features:
Servo Size: 41mm x 20 x 43mm
Weight: 55g
Metal gear hight torque
Double ball bearing design
Stall Torque: 4.8V – 13kg/cm, 6.0V – 15kg/cm
No Load Operating Speed: 4.8V – 0.17sec/60°, 6.0V – 0.14sec/60°
Dead band width: 5 microseconds
Operating voltage: 4.8V – 6V
Temperature range: 0°- 55°
30cm 3pin connector wire

TowerPro MG995 Servo Motor 55g 10kg

admin — Wed, 27 Mar 2024 08:55:29 +0000

Servo MG995 comes with a wire of 30 cm in length and 3 ‘S’ contacts type mom. The output shaft of the servo rotates approximately 120 degrees (60 degrees in each direction). To control MG995 servos you can use any controllers with a logic supply 5 V including Arduino. The servo is manufactured in plastic housing. The output is the gearbox with metal gears. In the kit supplied plastic rocking different form factors.

Specifications MG995

Weight: 55 gram;
Dimension: about 40.7 x 19.7 x 42.9;
Torque: 8.5 kg x cm (4.8 V supply), 10 kg x cm (6 In);
Speed: 0.2 s/60º (at 4.8 V), 0.16 s/60º (6 V);
Working power supply: 4.8 – 7.2 V;
Dead zone width: 5 MS;
Operating temperature range: 0 ºC – 55 ºC.

High Torque metal gear standard servo

admin — Wed, 27 Mar 2024 08:55:15 +0000

Introduction:

Standard Metal Gear Servo with High Torque

With 360 degree rotation this servo is ideal for all robotics purposes

Metal Gears increases the durability and life of the motor

Specification

360 degree rotation

Metal Gears

Brand new and tested

Ideal for all robotics purposes

Items Included

360 degree with metal gear servo

Accessories