dc water pump – RoboIndia

R365 DC water Pump 12 V for Arduino ESP8266 Raspberry Pi with 1 Meter Pipe

admin — Wed, 27 Mar 2024 08:55:58 +0000

This DC6-12V MINI Aquarium water Pump R365 is the perfect choice for any project that requires water to be moved from one place to another. The pump is supplied with 1M of silicon hose that you can cut to your requirements, the hose provides a good seal and will not leak. Possible uses/projects include; a small aquarium pump, automatic plant watering system, making a water feature or music activated dancing water features to name but a few. When pumping a liquid the pump runs very quietly. The pump is also capable of pumping air, though when pumping air the pump is quite noisy in comparison. The R365 requires between 6 – 12V DC and between 0.5 – 0.7A and will deliver its maximum operating values when power is at the upper end of these ranges. The pump can handle pumping heated liquids up to a temperature of 80 degrees Celcius and when suitably powered can suck water through the tube from up to 2m and pump water vertically for up to 3m. This immersible pump can be used to water your plants, make a fountain or waterfall, and even change your fish tank water. It works quietly with the sound level under 30db.The pump has a filter inside as well as a suction cup which can help stick it to smooth surfaces tightly.

Items Included:

1. DC6-12V MINI Aquarium water Pump R365 â€“ 1 Nos

R385 DC water Pump 12 V for Arduino ESP8266 Raspberry Pi with 1 Meter Pipe

admin — Wed, 27 Mar 2024 08:55:58 +0000

This DC6-12V MINI Aquarium water Pump R385 is the perfect choice for any project that requires water to be moved from one place to another. The pump is supplied with 1M of silicon hose that you can cut to your requirements, the hose provides a good seal and will not leak. Possible uses/projects include; a small aquarium pump, automatic plant watering system, making a water feature or music activated dancing water features to name but a few. When pumping a liquid the pump runs very quietly. The pump is also capable of pumping air, though when pumping air the pump is quite noisy in comparison. The R385 requires between 6 – 12V DC and between 0.5 – 0.7A and will deliver its maximum operating values when power is at the upper end of these ranges. The pump can handle pumping heated liquids up to a temperature of 80 degrees Celcius and when suitably powered can suck water through the tube from up to 2m and pump water vertically for up to 3m. This immersible pump can be used to water your plants, make a fountain or waterfall, and even change your fish tank water. It works quietly with the sound level under 30db.The pump has a filter inside as well as a suction cup which can help stick it to smooth surfaces tightly.

Items Included:

1. DC6-12V MINI Aquarium water Pump R385 – 1 Nos

DC Submersible Pump DC – 9v with 50cm Pipe Arduino, esp8266 and raspberry pi

admin — Wed, 27 Mar 2024 08:55:44 +0000

DC 9V operated submersible water pump is ideal for making automatic plant watering system using Arduino ,esp8266 and raspberry pi.Kit includes 50 cm tube for your project assistant.
Items Included:
1. DC Water Pump – 1 nos.
2. Tube 50cm meter – 1 Nos.

Mini DC Water Pump

admin — Wed, 27 Mar 2024 08:54:48 +0000

Introduction :

Mini DC Water pump for electronics project.With high quality RS360SH motor. We are also providing tube 2 meter long for pumping and discharge.

Features:

Operating Voltage : 3-9v
Nominal Voltage : 7.2v
Current Consumption : 1.8 A
We recommebd you to use 2.5 A supply.at 7.2 volt,you can also use 5v/6v or 9v supply.

Warning:

Provide positive supply to the connector which is marked red.
Dont run on no load condition for a longer duration.

Kit Contents:

Mini DC Water pump.
Tube (2 meter)