This is a motor and wheel kit for constructing two wheel drive robot (2WD). This kit contains all item to make a robot except chassis and castor. Any customised chassis can be used with motor clamp provided in this kit.

This kit very useful to make a robot with Arduino, Raspberry Pi, NodeMCU, AVR, PIC and other micro contorller units.

Kit contains following-

1. BO Motors – 2 Pcs
2. BO motor rubber wheel 65x30mm – 2 Pcs
3. Motor clamps – 2 Pcs
4. 2.5 mm x 25 mm Screw – 8 Pcs
5. 2.5 mm Nuts – 8 Pcs

Total – 22 Items are included in this kit

This is a motor and wheel kit for constructing four wheel drive robot (4WD). This kit contains all item to make a robot except chassis. Any customised chassis can be used with motor clamp provided in this kit.

This kit very useful to make a robot with Arduino, Raspberry Pi, NodeMCU, AVR, PIC and other micro contorller units.

Kit contains following-

1. BO Motors – 4 Pcs
2. BO motor rubber wheel 65x30mm – 4 Pcs
3. Motor clamps – 4 Pcs
4. 4xAA Battery holder with wire – 1 Pc.
5. 2.5 mm x 25 mm Screw – 8 Pcs
6. 2.5 mm Nuts – 8 Pcs
7. 3 mm x 15 mm Screw – 8 Pcs
8. 3 mm Nuts – 8 Pcs

Total – 45 Items are included in this kit

This is a motor and wheel kit for constructing four wheel drive robot (4WD). This kit contains all item to make a robot except chassis. Any customised chassis can be used with motor clamp provided in this kit.

This kit very useful to make a robot with Arduino, Raspberry Pi, NodeMCU, AVR, PIC and other micro contorller units.

Kit contains following-

1. BO Motors – 4 Pcs
2. BO motor rubber wheel 65x30mm – 4 Pcs
3. Motor clamps – 4 Pcs
4. 6xAA Battery holder with wire – 1 Pc.
5. 2.5 mm x 25 mm Screw – 8 Pcs
6. 2.5 mm Nuts – 8 Pcs
7. 3 mm x 15 mm Screw – 8 Pcs
8. 3 mm Nuts – 8 Pcs

Total – 45 Items are included in this kit

Specification:

Drive Type: Differential Drive / 4 Wheel Drive
Motors: Straight BO motors – 4
Wheel: Rubber Wheel 65×30 mm
Controller: Wireless transmitter and Receiver Motor Controller
Operation Mode: Manual
Power Source Robot: Robot comes with 6xAA battery holder, User needs to buy batteries separately .
Power Source Joystick: 9V battery, User needs to buy batteries separately .
Robot Dimension: Width-220mm, Length: 190mm, Height: 130mm
Tutorials Available, user needs to assemble some parts it comes partially assembled.

Note: No battery is shipped with this robot due to shipping constrains. Users need to buy batteries as per the specification mentioned above.

Tutorials comprises video tutorials, guides and codes for making a PC Controlled robot out of this kit. Please note that this is a Do It Yourself (DIY) kit for making a PC Controlled robot, thus you need to have a little bit knowledge of Arduino and Arduino Platform. All of the tutorials for this kit are online only, No tutorial or guide is provided in form of CD/DVD or print with this kit.

Kit Contains

1. Arduino UNO (DIP Atmega 328) Compatible Board – 1 No.
2. Arduino Motor Shield – 1 No.
3. BO Motor L Type – 2 Nos.
4. 65X30 Rubber Wheel – 2 No.
5. Metallic Castor Wheel – 1 No.
6. ARK-01 Wooden Chassis – 1 No.
7. 6XAA Battery Holder- 1 Nos.
8. USB A to B Cable – 1 No.
9. Castor Screw Nut set – 3 Nos.
10. Motor Screw Nut set – 4 Nos.
11. Battery Holder Nut Screw Set – 2 Nos.
12. Arduino Screw Stud Set – 4 Nos.

Tutorials available: https://roboindia.com/tutorials/pc-controlled-robot-arduino-robotic-kit

Tutorials comprises video tutorials, guides and codes for making an Obstacle Avoiding robot out of this kit. Please note that this is a Do It Yourself (DIY) kit for making an Obstacle Avoiding robot, thus you need to have a little bit knowledge of Arduino and Arduino Platform. All of the tutorials for this kit are online only, No tutorial or guide is provided in form of CD/DVD or print with this kit.

Kit Contains

1. Arduino UNO (DIP Atmega 328) Compatible Board – 1 No.
2. Arduino Motor Shield – 1 No.
3. HC-SR04 Ultrasonic Sensor – 1 No.
4. HC-SR04 Base Module- 1 No.
5. BO Motor L Type – 2 Nos.
6. Micro 90G Servo – 1 No.
7. 65X30 Rubber Wheel – 2 No.
8. Metallic Castor Wheel – 1 No.
9. ARK-01 Wooden Chassis – 1 No.
10. 6XAA Battery Holder- 1 Nos.
11. F2F Jumper Wires – 10 No.
12. USB A to B Cable – 1 No.
13. Castor Screw Nut set – 3 Nos.
14. Motor Screw Nut set – 4 Nos.
15. Battery Holder Nut Screw Set – 2 Nos.
16. Arduino Screw Stud Set – 4 Nos.
17. 9G Servo Screw Nut set – 2 Nos.

Tutorials available: https://roboindia.com/tutorials/obstacle-avoiding-robot-arduino-robotic-kit

Tutorials comprises video tutorials, guides and codes for making a line follower robot out of this kit. Please note that this is a Do It Yourself (DIY) kit for making a line follower, thus you need to have a little bit knowledge of Arduino and Arduino Platform. All of the tutorials for this kit are online only, No tutorial or guide is provided in form of CD/DVD or print with this kit.

Kit Contains

1. Arduino UNO (DIP Atmega 328) Compatible Board – 1 No.
2. Arduino Motor Shield – 1 No.
3. Analog and Digital IR sensor- 2 Nos.
4. BO Motor L Type – 2 Nos.
5. 65X30 Rubber Wheel – 2 No.
6. Metallic Castor Wheel – 1 No.
7. ARK-01 Wooden Chassis – 1 No.
8. 6XAA Battery Holder- 1 Nos.
9. F2F Jumper Wires – 6 No.
10. USB A to B Cable – 1 No.
11. Castor Screw Nut set – 3 Nos.
12. Motor Screw Nut set – 4 Nos.
13. Battery Holder Nut Screw Set – 2 Nos.
14. IR sensor Screw Nut set – 4 Nos.
15. Arduino Screw Stud Set – 4 Nos.

Tutorials available: https://roboindia.com/tutorials/line-follower-arduino-robotic-kit

Tutorials comprises video tutorials, guides and codes for making a DTMF Controlled robot out of this kit. Please note that this is a Do It Yourself (DIY) kit for making a DTMF Controlled robot, thus you need to have a little bit knowledge of Arduino and Arduino Platform. All of the tutorials for this kit are online only, No tutorial or guide is provided in form of CD/DVD or print with this kit.

Kit Contains

1. Arduino UNO (DIP Atmega 328) Compatible Board – 1 No.
2. Arduino Motor Shield – 1 No.
3. DTMF module – 1 No.
4. BO Motor L Type – 2 Nos.
5. 65X30 Rubber Wheel – 2 No.
6. Metallic Castor Wheel – 1 No.
7. ARK-01 Wooden Chassis – 1 No.
8. 6XAA Battery Holder- 1 Nos.
9. F2F Jumper Wires – 10 No.
10. USB A to B Cable – 1 No.
11. 3.5mm Aux. Cable – 1 No.
12. Castor Screw Nut set – 3 Nos.
13. Motor Screw Nut set – 4 Nos.
14. Battery Holder Nut Screw Set – 2 Nos.
15. Arduino Screw Stud Set – 4 Nos.
16. DTMF Screw Stud Set – 4 Nos.

Tutorials available: https://roboindia.com/tutorials/dtmf-robot-the-arduino-robotic-kit

Robo India presents Obstacle Avoiding robot DIY kit based on Robo India’s Phantom Chassis and Arduino Platform. A Complete Do It Yourself (DIY) kit for a obstacle avoiding robot. The kit is supported by detailed tutorials for assembly, programming and explaination of the kit.

Kit Includes –

1. Compatible Arduino UNO Board – 1 No.
2. Robo India’s Motor Shield – 1 No.
3. Robo India’s Phantom Chassis – 1 No.
4. Robo India’s DTMF Board – 1 No.
5. 3 LED Strip – 1 No.
6. BO Motor – 2 Nos.
7. 9G micro Sevo – 1 No.
8. SR-04 Ultrasonic Range finding sensor – 1 No.
9. Tyres – 2 Nos.
10. 6XAA Battery Holder – 1 Nos.
11. USB Cable – 1 No.
12. Male to Female Jumper Wire – 10 Nos.
13. Nut Bolt Spacers – 1 Set

Resources:
Chassis assembly Guide- https://roboindia.com/tutorials/phantom-chassis
Obstacle Avoiding Robot Tutorial – https://roboindia.com/tutorials/obstacle-avoiding-robot
Ultrasonic Range Finder on Arduino – https://roboindia.com/tutorials/arduino-ultrasonic-range-sensor-HC-SR04
Servo Motor on Arduino – https://roboindia.com/tutorials/arduino-servo-control

Robo India presents Obstacle Avoiding robot DIY kit based on Robo India’s Phantom Chassis and Arduino Platform. A Complete Do It Yourself (DIY) kit for a obstacle avoiding robot. The kit is supported by detailed tutorials for assembly, programming and explaination of the kit.

Kit Includes –

1. Original Arduino UNO Board (Made In Italy)- 1 No.
2. Robo India’s Motor Shield – 1 No.
3. Robo India’s Phantom Chassis – 1 No.
4. Robo India’s DTMF Board – 1 No.
5. 3 LED Strip – 1 No.
6. BO Motor – 2 Nos.
7. 9G micro Sevo – 1 No.
8. SR-04 Ultrasonic Range finding sensor – 1 No.
9. Tyres – 2 Nos.
10. 6XAA Battery Holder – 1 Nos.
11. USB Cable – 1 No.
12. Male to Female Jumper Wire – 10 Nos.
13. Nut Bolt Spacers – 1 Set

Resources:
Chassis assembly Guide- https://roboindia.com/tutorials/phantom-chassis
Obstacle Avoiding Robot Tutorial – https://roboindia.com/tutorials/obstacle-avoiding-robot
Ultrasonic Range Finder on Arduino – https://roboindia.com/tutorials/arduino-ultrasonic-range-sensor-HC-SR04
Servo Motor on Arduino – https://roboindia.com/tutorials/arduino-servo-control