Tutorials comprises video tutorials, guides and codes for making a PC Controlled robot out of this kit. Please note that this is a Do It Yourself (DIY) kit for making a PC Controlled robot, thus you need to have a little bit knowledge of Arduino and Arduino Platform. All of the tutorials for this kit are online only, No tutorial or guide is provided in form of CD/DVD or print with this kit.

Kit Contains

1. Arduino UNO (DIP Atmega 328) Compatible Board – 1 No.
2. Arduino Motor Shield – 1 No.
3. BO Motor L Type – 2 Nos.
4. 65X30 Rubber Wheel – 2 No.
5. Metallic Castor Wheel – 1 No.
6. ARK-01 Wooden Chassis – 1 No.
7. 6XAA Battery Holder- 1 Nos.
8. USB A to B Cable – 1 No.
9. Castor Screw Nut set – 3 Nos.
10. Motor Screw Nut set – 4 Nos.
11. Battery Holder Nut Screw Set – 2 Nos.
12. Arduino Screw Stud Set – 4 Nos.

Tutorials available: https://roboindia.com/tutorials/pc-controlled-robot-arduino-robotic-kit

Robo India presents Obstacle Avoiding robot DIY kit based on Robo India’s Phantom Chassis and Arduino Platform. A Complete Do It Yourself (DIY) kit for a obstacle avoiding robot. The kit is supported by detailed tutorials for assembly, programming and explaination of the kit.

Kit Includes –

1. Compatible Arduino UNO Board – 1 No.
2. Robo India’s Motor Shield – 1 No.
3. Robo India’s Phantom Chassis – 1 No.
4. Robo India’s DTMF Board – 1 No.
5. 3 LED Strip – 1 No.
6. BO Motor – 2 Nos.
7. 9G micro Sevo – 1 No.
8. SR-04 Ultrasonic Range finding sensor – 1 No.
9. Tyres – 2 Nos.
10. 6XAA Battery Holder – 1 Nos.
11. USB Cable – 1 No.
12. Male to Female Jumper Wire – 10 Nos.
13. Nut Bolt Spacers – 1 Set

Resources:
Chassis assembly Guide- https://roboindia.com/tutorials/phantom-chassis
Obstacle Avoiding Robot Tutorial – https://roboindia.com/tutorials/obstacle-avoiding-robot
Ultrasonic Range Finder on Arduino – https://roboindia.com/tutorials/arduino-ultrasonic-range-sensor-HC-SR04
Servo Motor on Arduino – https://roboindia.com/tutorials/arduino-servo-control

Robo India presents Obstacle Avoiding robot DIY kit based on Robo India’s Phantom Chassis and Arduino Platform. A Complete Do It Yourself (DIY) kit for a obstacle avoiding robot. The kit is supported by detailed tutorials for assembly, programming and explaination of the kit.

Kit Includes –

1. Original Arduino UNO Board (Made In Italy)- 1 No.
2. Robo India’s Motor Shield – 1 No.
3. Robo India’s Phantom Chassis – 1 No.
4. Robo India’s DTMF Board – 1 No.
5. 3 LED Strip – 1 No.
6. BO Motor – 2 Nos.
7. 9G micro Sevo – 1 No.
8. SR-04 Ultrasonic Range finding sensor – 1 No.
9. Tyres – 2 Nos.
10. 6XAA Battery Holder – 1 Nos.
11. USB Cable – 1 No.
12. Male to Female Jumper Wire – 10 Nos.
13. Nut Bolt Spacers – 1 Set

Resources:
Chassis assembly Guide- https://roboindia.com/tutorials/phantom-chassis
Obstacle Avoiding Robot Tutorial – https://roboindia.com/tutorials/obstacle-avoiding-robot
Ultrasonic Range Finder on Arduino – https://roboindia.com/tutorials/arduino-ultrasonic-range-sensor-HC-SR04
Servo Motor on Arduino – https://roboindia.com/tutorials/arduino-servo-control

Robo India presents Line follwer DIY kit based on Robo India’s Phantom Chassis and Arduino Platform. A Complete Do It Yourself (DIY) kit for a line following robot. The kit is supported by detailed tutorials for assembly, programming and explaination of the kit.

Kit Includes –

Compatible Arduino UNO Board- 1 No.

Robo India’s Motor Shield – 1 No.

Robo India’s Phantom Chassis – 1 No.

Digital + Analog IR sensro – 2 Nos.

3 LED Strip – 1 Nos.

BO Motor – 2 Nos.

Tyres – 2 Nos.

6XAA Battery Holder – 1 Nos.

USB Cable – 1 No.

Male to Female Jumper Wire – 10 Nos.

Nut Bolt Spacers – 1 Set

Resources

Assembly Guide: http://goo.gl/IXcV5t

Line Follower on Phantom Chasis: http://goo.gl/hZm5ST

• This kit is R2 version of Robo India’s builder’s kit, several new parts, components and tutorials are included in R2 version.
• Kit is with a series of online tutorials.
• Kit contains all required parts in it.
• Self Sufficient Kit.
• Robo India Builders Kit without any Arduino board . This kit is followed by the series of tutorials which cover all the basic concepts of embedded. Enjoy Making!!!
• Tutorials – http://roboindia.com/tutorials/arduino-builders-kit

Package Includes:

• 3 Pin LCD Back Pack – 1 No.
• 16X2 LCD – 1 No.
• 16X2 LCD Acrylic Cover – 1 set
• Plus model Breadboard – 1 No.
• Breadboard Platform – 1 No.
• Jumper Wire male to male – 30 Nos.
• Jumper Wire male to female – 10 Nos.
• Jumper Wire female to female – 10 Nos.
• 100 ohm Resistance – 10 Nos.
• 220 ohm Resistance – 10 Nos.
• 1 K Resistance – 10 Nos.
• 4.7 K Resistance – 10 Nos.
• 8.2 K Resistance – 10 Nos.
• 10 K Resistance – 10 Nos.
• 1 M Resistance – 10 Nos.
• Diodes 1N4007- 5 Nos.
• Transistor 2N2222 – 5Nos.
• Micro Servo – 1 Nos.
• 100 uf Capacitors – 3 Nos.
• 0.1 uf Capacitors – 5 Nos.
• 22 pf Capacitors – 5 Nos.
• 10 K preset – 1 Nos.
• Battery Snap – 1 No.
• Pushbutton – 2 No.
• Shift Resistor 74HC595 – 1 No.
• Temperature Sensor LM 35 – 1No.
• 5V dual pole relay – 1 No.
• IR LED & Photo diode – 1 Pair
• Gearless DC Motor – 1 No.
• LDR – 1 No.
• RGB LED – 1 No.
• Red Indicator LED – 10 Nos.
• Green Indicator LED – 10 Nos.
• Blue Indicator LED – 10 Nos.
• Yellow Indicator LED – 10 Nos.
• Peizo Buzzer – 1 No.
• Screw Driver – 1 No.
• USB Cable – 1 No.
• Metal Studs – 8 Nos.
• M3 Screws- 16 Nos.
• Plastic container / Box – 1 No.

Resources:

• Tutorials are available here- http://roboindia.com/tutorials/arduino-builders-kit

• Microcontroller -Atmel ATmega168 or ATmega328
• Operating Voltage (logic level) – 5 V
• Input Voltage (recommended) -7-12 V
• Input Voltage (limits) – 6-20 V
• Digital I/O Pins – 14 (of which 6 provide PWM output)
• Analog Input Pins – 8
• DC Current per I/O Pin – 40 mA
• Flash Memory – 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB used by bootloader
• SRAM – 1 KB (ATmega168) or 2 KB (ATmega328)
• EEPROM – 512 bytes (ATmega168) or 1 KB (ATmega328)
• Clock Speed – 16 MHz
• Dimensions – 0.73" x 1.70"
• Length – 45 mm
• Width – 18 mm
• Weigth – 5 g

Package Includes:

• Arduino Nana Development Board – 1 No.
• 15X1 Burg strip – 2 Nos.
• 3X2 Brug Strip – 1 No.
• Mini USB cable – 1 No.
• Plus model Breadboard – 1 No.
• Breadboard base plate – 1 No.

Resources:

• Guide to assemble base plate with breadboard – http://roboindia.com/tutorials/Breadboard-platform-assembly
• Arduino Nano link – https://www.arduino.cc/en/Main/ArduinoBoardNano

• This kit is R2 version of Robo India’s builder’s kit, several new parts, components and tutorials are included in R2 version.
• Kit is with a series of online tutorials.
• Kit contains all required parts in it.
• Self Sufficient Kit.
• Robo India Builders Kit with Original Arduino UNO R3 board . This kit is followed by the series of tutorials which cover all the basic concepts of embedded. Enjoy Making!!!
• Tutorials – http://roboindia.com/tutorials/arduino-builders-kit

Package Includes:

• Original Arduino UNO R3 ( Made in Italy)- 1 No.
• 3 Pin LCD Back Pack – 1 No.
• 16X2 LCD – 1 No.
• 16X2 LCD Acrylic Cover – 1 set
• Plus model Breadboard – 1 No.
• Breadboard Platform – 1 No.
• Jumper Wire male to male – 30 Nos.
• Jumper Wire male to female – 10 Nos.
• Jumper Wire female to female – 10 Nos.
• 100 ohm Resistance – 10 Nos.
• 220 ohm Resistance – 10 Nos.
• 1 K Resistance – 10 Nos.
• 4.7 K Resistance – 10 Nos.
• 8.2 K Resistance – 10 Nos.
• 10 K Resistance – 10 Nos.
• 1 M Resistance – 10 Nos.
• Diodes 1N4007- 5 Nos.
• Transistor 2N2222 – 5Nos.
• Micro Servo – 1 Nos.
• 100 uf Capacitors – 3 Nos.
• 0.1 uf Capacitors – 5 Nos.
• 22 pf Capacitors – 5 Nos.
• 10 K preset – 1 Nos.
• Battery Snap – 1 No.
• Pushbutton – 2 No.
• Shift Resistor 74HC595 – 1 No.
• Temperature Sensor LM 35 – 1No.
• 5V dual pole relay – 1 No.
• IR LED & Photo diode – 1 Pair
• Gearless DC Motor – 1 No.
• LDR – 1 No.
• RGB LED – 1 No.
• Red Indicator LED – 10 Nos.
• Green Indicator LED – 10 Nos.
• Blue Indicator LED – 10 Nos.
• Yellow Indicator LED – 10 Nos.
• Peizo Buzzer – 1 No.
• Screw Driver – 1 No.
• USB Cable – 1 No.
• Metal Studs – 8 Nos.
• M3 Screws- 16 Nos.
• Plastic container / Box – 1 No.

Resources:

• Tutorials are available here-http://roboindia.com/tutorials/arduino-builders-kit