arduino board – RoboIndia

Roinco Arduino Nano V3 compatible board

admin — Wed, 27 Mar 2024 08:55:40 +0000

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328; offers the same connectivity and specs of the UNO board in a smaller form factor.
The Arduino Nano is programmed using the Arduino Software (IDE), Arduino Integrated Development Environment common to all our boards and running both online and offline.

Roinco Arduino Nano V3 compatible board with mini USB cord

admin — Wed, 27 Mar 2024 08:55:40 +0000

Arduino UNO R3 Compatible Breadboard Kit with Breadboard, Wooden base and USB Cable

admin — Wed, 27 Mar 2024 08:55:09 +0000

Arduino UNO R3 Compatible Board
Wooden Base for breadboard and Arduino Board
Arduino Board with DIP AtMega 328
Small Plus one size Breadboard (400 points, colored)

Kit Includes
Arduino UNO R3 Compatible Board x 1 pc
Small Plus one size Breadboard (400 points, colored) x 1 pc
Wooden Base x 1 pc
Metal Studs x 4 pcs
USB Cable for Arduino x 1 pcs
Screws x 8 pcs

Arduino UNO R3 Compatible with DIP Atmega 328

admin — Wed, 27 Mar 2024 08:55:09 +0000

Arduino/Genuino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

"Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.

Arduino starter kit Revision 2 for beginners (Builder’s Kit Revision 2 by Robo India) without Arduino Board

admin — Wed, 27 Mar 2024 08:55:04 +0000

Specifications of Robo India’s Builders Kit R2 ( Arduino Starter Kit)

This kit is R2 version of Robo India’s builder’s kit, several new parts, components and tutorials are included in R2 version.
Kit is with a series of online tutorials.
Kit contains all required parts in it.
Self Sufficient Kit.
Robo India Builders Kit without any Arduino board . This kit is followed by the series of tutorials which cover all the basic concepts of embedded. Enjoy Making!!!
Tutorials – http://roboindia.com/tutorials/arduino-builders-kit

Package Includes:

3 Pin LCD Back Pack – 1 No.
16X2 LCD – 1 No.
16X2 LCD Acrylic Cover – 1 set
Plus model Breadboard – 1 No.
Breadboard Platform – 1 No.
Jumper Wire male to male – 30 Nos.
Jumper Wire male to female – 10 Nos.
Jumper Wire female to female – 10 Nos.
100 ohm Resistance – 10 Nos.
220 ohm Resistance – 10 Nos.
1 K Resistance – 10 Nos.
4.7 K Resistance – 10 Nos.
8.2 K Resistance – 10 Nos.
10 K Resistance – 10 Nos.
1 M Resistance – 10 Nos.
Diodes 1N4007- 5 Nos.
Transistor 2N2222 – 5Nos.
Micro Servo – 1 Nos.
100 uf Capacitors – 3 Nos.
0.1 uf Capacitors – 5 Nos.
22 pf Capacitors – 5 Nos.
10 K preset – 1 Nos.
Battery Snap – 1 No.
Pushbutton – 2 No.
Shift Resistor 74HC595 – 1 No.
Temperature Sensor LM 35 – 1No.
5V dual pole relay – 1 No.
IR LED & Photo diode – 1 Pair
Gearless DC Motor – 1 No.
LDR – 1 No.
RGB LED – 1 No.
Red Indicator LED – 10 Nos.
Green Indicator LED – 10 Nos.
Blue Indicator LED – 10 Nos.
Yellow Indicator LED – 10 Nos.
Peizo Buzzer – 1 No.
Screw Driver – 1 No.
USB Cable – 1 No.
Metal Studs – 8 Nos.
M3 Screws- 16 Nos.
Plastic container / Box – 1 No.

Resources:

Tutorials are available here- http://roboindia.com/tutorials/arduino-builders-kit

Arduino starter kit Revision 2 for beginners (Buildes Kit Revision 2) with Original Arduino UNO R3 board (Made in ITALY)

admin — Wed, 27 Mar 2024 08:54:59 +0000

Specifications of Robo India’s Builders Kit R2 ( Arduino Starter Kit)

This kit is R2 version of Robo India’s builder’s kit, several new parts, components and tutorials are included in R2 version.
Kit is with a series of online tutorials.
Kit contains all required parts in it.
Self Sufficient Kit.
Robo India Builders Kit with Original Arduino UNO R3 board . This kit is followed by the series of tutorials which cover all the basic concepts of embedded. Enjoy Making!!!
Tutorials – http://roboindia.com/tutorials/arduino-builders-kit

Package Includes:

Original Arduino UNO R3 ( Made in Italy)- 1 No.
3 Pin LCD Back Pack – 1 No.
16X2 LCD – 1 No.
16X2 LCD Acrylic Cover – 1 set
Plus model Breadboard – 1 No.
Breadboard Platform – 1 No.
Jumper Wire male to male – 30 Nos.
Jumper Wire male to female – 10 Nos.
Jumper Wire female to female – 10 Nos.
100 ohm Resistance – 10 Nos.
220 ohm Resistance – 10 Nos.
1 K Resistance – 10 Nos.
4.7 K Resistance – 10 Nos.
8.2 K Resistance – 10 Nos.
10 K Resistance – 10 Nos.
1 M Resistance – 10 Nos.
Diodes 1N4007- 5 Nos.
Transistor 2N2222 – 5Nos.
Micro Servo – 1 Nos.
100 uf Capacitors – 3 Nos.
0.1 uf Capacitors – 5 Nos.
22 pf Capacitors – 5 Nos.
10 K preset – 1 Nos.
Battery Snap – 1 No.
Pushbutton – 2 No.
Shift Resistor 74HC595 – 1 No.
Temperature Sensor LM 35 – 1No.
5V dual pole relay – 1 No.
IR LED & Photo diode – 1 Pair
Gearless DC Motor – 1 No.
LDR – 1 No.
RGB LED – 1 No.
Red Indicator LED – 10 Nos.
Green Indicator LED – 10 Nos.
Blue Indicator LED – 10 Nos.
Yellow Indicator LED – 10 Nos.
Peizo Buzzer – 1 No.
Screw Driver – 1 No.
USB Cable – 1 No.
Metal Studs – 8 Nos.
M3 Screws- 16 Nos.
Plastic container / Box – 1 No.

Resources:

Tutorials are available here-http://roboindia.com/tutorials/arduino-builders-kit